No.8214-00
Dual Point Laser Infrared Thermometer
SK-8140
JAN code : 4974425821402
Calibration : Available
JCSS Accredited Calibration : Not available
This product is discontinued. Refer to other infrared thermometers.
Leaflet
Instruction manual
Feature
■ Equipped with two laser markers
■ IPX4 waterproof: resists water splashes from any direction.
■ Backlight on display
■ Emissivity is adjustable between 0.10 and 1.00 in steps of 0.01.
What is emissivity?
- All objects emit infrared rays corresponding to surface temperature. The amount of energy given by radiated infrared rays depends not only on temperature but also material and surface condition of the object, thus the coefficient named emissivity is necessary to calculate temperature.
■ Setting upper and lower limit alarm, "peak" mode (continuous display of maximum), "valley" mode (continuous display of minimum) are available.
When "peak" mode is chosen, SK-8140 measures temperature continuously and shows a maximum value constantly. "Valley" mode does the same for a minimum value.
■ PSC mark is labeled on the device to prove its quality based on Japan's Consumer Product Safety Act.
Description
■ Caution! This device is for industrial use, not for clinical use.
■ SK-8140 is designed to measure an ultra-small spot with two laser markers emitted from the device crossing at 27 mm away to indicate the measured spot.
It is ideal for small-sized precise measurement such as detection of malfunctioning overheat in semiconductors or electronic components.
Two laser markers from SK-8140:
Correlation of laser marker and measuring range:
Specifications
| Cat. No. | 8214-00 | |
| Product name | Dual Point Laser Infrared Thermometer | |
| Model name | SK-8140 | |
| Measuring range | −50 to 500°C | |
| Accuracy | ±1%rdg (200°C or more) ±2°C (1 to 199°C) ±5°C (0°C or less) under blackbody calibration with ambient temperature 23±5°C, emissivity 0.95 | |
| Temperature drift | ±0.1%rdg/°C (200°C and up) ±0.2°C/°C (below 200°C) where emissivity is 0.95 | |
| Repeatability | ±1°C (object temperature > 30°C, ambient temperature 23±5°C, emissivity 0.95) | |
| Resolution | 1°C | |
| Response speed | 90% in 1.5 seconds | |
| Emissivity | Adjustable between 0.10 and 1.00 in steps of 0.01 | |
| Distance coefficient | Measures a spot circle of 2.5 mm diameter from 27 mm away | |
| Detector | Thermopile | |
| Measured wavelength | 8 to 14 μm | |
| Laser marker | Dual-point marker Source wavelength: 650 nm Output: Less than 1 mW Certified for PSC, a standard based on Japan's Consumer Product Safety Act, as a class II portable laser device. | |
| Functions | Automatic power-off, automatic backlight, Hi/Lo alarm, three modes (ordinary measurement mode, peak mode, valley mode) switchable | |
| Alarm volume | 55 dB | |
| Waterproofness | IPX4 waterproof | |
| Operation ambient | 0 to 50°C, less than 85%rh without condensing | |
| Power | AA alkaline battery x2, consumption 120 mA | |
| Battery life | Approx. 16 hours if laser is on at room temperature | |
| Materials | Main body | Polycarbonate |
| Lens | Silicone | |
| Dimensions | 44 (W) x 152 (H) x 27.5 (D) mm | |
| Weight | 140 g including batteries | |
| Standard accessories | Neck strap x1, AA alkaline battery x2, instruction manual | |
